Daikin DCS601C51 - Page 65

1.
Select “Network Setting” according to the
operating procedure shown in page 56.
2.
Confirm that the Network setting screen
Screen 1 will be displayed as shown in
the left-hand column.
3.
Push the [Modify] button 1 and enter a
Host name on the resulting input screen.
4.
Push the [Modify] button 2 and enter
an IP address on the resulting input
screen.
5.
Push the [Modify] button 3 and enter a
Subnet mask on the resulting input
screen.
6.
Push the [Modify] button 4 and enter a
Default gateway on the resulting input
screen.
7.
Push the [Modify] button 5 and enter a
Primary DNS on the resulting input
screen.
8.
Push the [Modify] button 6 and enter a
Secondary DNS on the resulting input
screen.
9.
After making the settings, push the [OK]
button 7 .
To cancel the settings made, push the
[Cancel] button.
Network Setting
Screen 1 Network Setting
7
1
2
3
4
5
6
System Setup Menu Operation
63