Danfoss VACON OPTEA User Manual

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Parameter
Selection
Unit
Description
Group 4
Digital Output 2
SSM
SBC
Group 5
Group 6
Group 7
Group 8
–
Use this parameter to select the func-
tion for the digital output.
Operation for Output 1
Operation for Output 2
AND
OR
NAND
NOR
–
Use this parameter to select the logical
function used to determine the output
value from the selected signals. It is
used when a group is selected for the
output.
Group 1 for safe digital output 1
Group 2 for safe digital output 1
Group 3 for safe digital output 1
Group 4 for safe digital output 1
Group 5 for safe digital output 2
Group 6 for safe digital output 2
Group 7 for safe digital output 2
Group 8 for safe digital output 2
Group 1 and Group 5
STO Reached
SS1 Reached
SS2 Reached
SQS Reached
SOS Reached
SBC Reached
STO and SBC Reached
Group 2 and Group 6
SLS 1 Reached
SLS 2 Reached
SLS 3 Reached
SSR Reached
SMS Reached
SSM Reached
SSM Above Max Limit
SSM Below Min Limit
–
Use this parameter to select which sig-
nals are used to generate the output
value. A checkbox selection.
Group 1 for safe digital output 1
Group 2 for safe digital output 1
Group 3 for safe digital output 1
Group 4 for safe digital output 1
Group 5 for safe digital output 2
Group 6 for safe digital output 2
Group 7 for safe digital output 2
Group 8 for safe digital output 2
Group 3 and Group 7
STO Active
SS1 Active
SS2 Active
SQS Active
SLS 1 Active
SLS 2 Active
SLS 3 Active
SSR Active
SMS Active
SSM Active
Group 4 and Group 8
–
Use this parameter to select which sig-
nals are used to generate the output
value. A checkbox selection.
–
Use this parameter to select which sig-
nals are used to generate the output
value. A checkbox selection.
AQ319736045637en-000101 / DPD01798128 | Danfoss A/S © 2021.06
Parameter List
VACON® NXP Advanced Safety Options
Operating Guide

Danfoss VACON OPTEA Specifications

General

Brand	Danfoss
Model	VACON OPTEA
Category	DC Drives
Language	English