2 • VACON
1 General
1.1 Purpose
This document is a commissioning report that contains the test instructions and a report of the testing that
is executed during commissioning of an Advanced safety option board.
If the safety configuration is changed later, the commissioning tests must be executed and documented
again.
The commissioning report can be printed or stored electronically. The document should be a part of the
technical file of the machine.
For detailed description of the Advanced safety option board and its features, see the Advanced safety
options Operating Guide.
1.2 References
The documents for VACON
®
products can be found in http://drives.danfoss.com/knowledge-
center/technical-documentation/
- Advanced safety options Operating Guide
1.3 Disclaimer
The compilation of information contained in this report relies upon configuration provided by the user (or a
person on whose behalf it is used) and is intended as a guide with purpose to test the safety
configuration(s) of an AC drive. It is not designed to replace or be used instead of an appropriately
designed safety test plan for each individual application. Several outside factors can influence the
functional safety, including other peripheral equipment within the plant and other neighbouring plants.
Each safety function that is used in a system must be carefully tested. The test results must be documented
and signed by the qualified personnel. This commissioning report can be used for such purpose. It is not
mandatory to use this commissioning report when the Advanced safety option board is used. This report is
meant as a help and might not be sufficient for the safety system.
The use of this report does not relieve the user of any obligation or duty that might arise under any
legislation covering the activities to which this documents has been or is to be applied.
The information contained herein is without warranty of any kind and does not constitute a guarantee that
the information is complete, current or correct and accepts no responsibility for unsuitable or inaccurate
material that may be encountered.