TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
5.4 CONFIGURE THE SYSTEM USING THE DC3000 USER INTERFACE
1. Turn on the DC3000 Dimensioning Controller.
2. Connect your laptop computer to the DM3610 HEAD1, HOST port using either the CAB-
ETH-M0x M12-IP67 ETHERNET CABLE or CBL-1534-0.2 ADAPT.CABLE ETH M12-TO-
RJ45F.
3. Open a browser and enter an IP address of 192.168.3.70. The DC3000 User Interface
opens.
4. Log on to the DC3000 User Interface. The default User ID is DM3610, and default
Password is DM3610.
NOTE: If the DC3000 is equipped with a keyboard and
mouse, the DC3000 User Interface can be accessed by
opening a browser on the DC3000 and entering an IP
address of 192.168.3.70.
NOTE: For a detailed description of the DC3000 User
Interface, see chapter 4.
To Next Page
Loading...