Datalogic DM3610 - Cleaning the Tachometer

TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
134
6
6.2.4 Cleaning the Tachometer
If your application uses the tachometer option for tracking purposes, be sure to clean the
tachometer wheels periodically as outlined below.
1. Turn off the product transport.
2. Turn off the DM3610 by disconnecting the power source.
3. Using a clean, soft cloth, wipe the wheels of the tachometer clean using a mild
detergent solution.
4. Before restarting the system, be sure the tachometer is making good contact with the
product transport.
5. Verify tachometer operation.
Figure 67: Tachometer Wheel