TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
5.6 DIMENSIONING IRREGULAR-SHAPED PACKAGES
The DM3610 Two-Head Dimensioning System provides the dimensioning of irregular-shaped
packages. When an irregular-shaped package (irregulars) passes through the dimensioning
area, the system determines the smallest possible cuboidal dimensions of the package
(length, width, and height) and creates a virtual bounding box around it. This is a very helpful
in determining shipping or storage space needed for irregulars.
Figure 60: System determines smallest possible cuboidal dimensions
To check your system calibration for accuracy, you must determine the smallest cuboidal
dimensions of an irregular-shaped test package, and then run the test package through the
system to check the dimensioned results.
To Next Page
Loading...