Datalogic DM3610 - Modify Settings | Serial; Modify Settings | Serial | Port #N

DC3000 USER INTERFACE
83
4
4.9 MODIFY SETTINGS | SERIAL
Use Modify Settings | Serial to specify serial settings for the dimensioner. Port #1 and Port #2
define two serial connections for sending messages. The Connection Type and Message
Format for each port can be set independently. The menu selections include:
Port #1
Port #2
Message Definition #1
Message Definition #2
4.9.1 Modify Settings | Serial | Port #N
Use Modify Settings | Serial | Port #1 (or #2) to define the format of message the dimensioner
sends to your host computer (or other device) connected to Serial Port n.
To adjust the serial port settings for the dimensioner:
1. In the tree menu under Modify Settings, navigate to Serial | Port #n. The Port #n
window opens.