Datalogic DM3610 - DC3000 Dimensioning Settings and Calibration (DC3000 User Interface)

DIMENSIONING SETUP AND CALIBRATION
117
5
9. Click Update. The HEAD1 and HEAD2 should now have replaced the placeholder listed
under DM3610’s in this cluster.
5.4.1 DC3000 Dimensioning Settings and Calibration (DC3000 User
Interface)
1. In the menu tree under Modify Settings, select Dimensioning | Settings. The
Dimensioning | Settings window opens.
2. Under Outputs, make sure Certification Mode is set to Off.