Datalogic DM3610 - Modify Settings | Network | Network Settings

TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
74
3
4.8.1 Modify Settings | Network | Network Settings
Use Modify Settings | Network | Network Settings to specify network settings (including
the IP address) for the dimensioner.
Net Host Connection 1 and Net Host Connection 2 define two network connections for
sending messages. The Connection Type and Message Format for each port can be set
independently. Message formatting is the same as for the serial port.
To adjust the network settings of the dimensioner:
1. In the tree menu under Modify Settings, navigate to Network | Network Settings.
The Network Settings window opens.