TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
4.8.2 Modify Settings | Network | Message Definition #N
Use Modify Settings | Network | Message Definition #n to define messages when User
Defined Messages has been selected in the Network Settings window.
To define the appearance of dimensioner messages:
1. In the tree menu under Modify Settings, navigate to Network | Message Definition #n.
The Message Definition #n window opens.
NOTE: When Standard Message is selected in Modify
Settings | Network | Network Settings, the system uses a
message format as defined by the standard software. When
selected, the input fields are not available.
To Next Page
Loading...