Datalogic DM3610 - Modify Settings | Controller Configuration

TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
56
3
4.5 MODIFY SETTINGS | CONTROLLER CONFIGURATION
Use Controller Configuration to identify and configure two-head dimensioning system. This
includes access to dimensioner information as well as configuration options (scan rate,
control panel and network access).
To set the dimensioner Configuration:
1. In the tree menu under Modify Settings, click Controller Configuration. The
Controller Configuration window opens.
2. Enter the appropriate information in the form as described below.
Field Name
Action/Definition
Dimensioner Information
Controller Name
Enter a user-defined DC3000 Controller name (up to 15 characters) in
the field provided. This is useful when it is necessary to identify
multiple controllers within the same building or application.
Controller Model
Displays the controller model (DC3000-1200, etc.)
Serial Number
Displays the 9 character Datalogic serial number of the DC3000 to
which the user interface has established a connection.
Software
Displays the name and revision number of the DC3000 Controller