TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
7. In the menu tree under Modify Settings, select System Configuration. The System
Configuration window opens.
The DC3000 System Configuration window identifies two separate DM3610 fields,
DM3610’s in this Cluster and DM3610’s not in this Cluster. The DM3610’s in this
Cluster field identifies DM3610’s that are connected to the Multi-Headed systems
network. The DM3610’s not in this Cluster field identifies units that have been located
but have not yet been included into the Multi-Headed system network.
8. In the Action drop-down list of the DM3610’s not in this Cluster section, select Replace
for HEAD1 and HEAD2.
To Next Page
Loading...