Datalogic DS6300 User Manual

DS6300 REFERENCE MANUAL
64
8
8 SOFTWARE CONFIGURATION
8.1 GENIUS™ INSTALLATION
Genius
™
is a new Datalogic scanner configuration tool providing several important
advantages:
 Wizard approach for new users;
 Multi-language version;
 Defined configuration directly stored in the reader;
 Communication protocol independent from the physical interface allowing consideration
of the reader as a remote object to be configured and monitored.
To install Genius™, proceed as follows:
1) Turn on the PC that will be used for configuration, running either Windows 98, 2000/NT, XP,
Vista or 7;
2) Insert the Genius™ CD-ROM;
3) Wait for the CD to autorun and follow the installation procedure.
8.2 GUIDE TO RAPID CONFIGURATION
8.2.1 Wizard for Quick Reader Setup
After installing the Genius™ software program (see above), and running it, the following
window appears asking the user to choose the desired configuration level:
Figure 88 - Genius™ Wizard Opening Window
The Wizard option is advised for new users, since it shows a step-by-step scanner
configuration. The parameters to be defined are the following:
- Barcode selection and definition;
- Operating mode selection and definition (see sub-paragraphs for further details);
- Digital Inputs/Outputs configuration;
- Hardware interface selection;
- Output data format configuration.

Datalogic DS6300 Specifications

General

Brand	Datalogic
Model	DS6300
Category	Barcode Reader
Language	English