dbx DriveRack 480 - Page 54

Detailed Parameters
®
42
Section 4
DriveRack
™
DriveRack™ User Manual
Section 4
High Slope 1 - 6-24dB/Octave (BW, Bessel) 12-48dB/Octave (L-R)
Sets the Highpass slope of the crossover filter.
Low Fc 2 - 20Hz to 20kHz
Selects the desired Lowpass crossover frequency.
Center Fc 2 - 20Hz to 20kHz
Adjusts the Low Fc and High Fc together.
High Fc 2 - 20Hz to 20kHz
Selects the desired Highpass crossover frequency.
Type 2 - Butterworth (BW), Bessel and Linkwitz-Riley(L-R)
Selects the desired crossover filter type.
Low Slope 2 - 6-24dB/Octave (BW, Bessel) 12-48dB/Octave (L-R)
Sets the Lowpass slope of the crossover filter.
High Slope 2 - 6-24dB/Octave (BW, Bessel) 12-48dB/Octave (L-R)
Sets the Highpass slope of the crossover filter.
4.5.5 4-BAND CROSSO
VERS - 1X4,
2X6W/DUAL SUB,
2X7, 2X8,
3X7W/DUAL SUB, 3X8 W/DUAL SUB (N/A 442)
Low Fc 1 - 20Hz to 20kHz
Selects the desired Lowpass crossover frequency.
Center Fc 1 - 20Hz to 20kHz
Adjusts the Low Fc and High Fc together.
High Fc 1 - 20Hz to 20kHz
Selects the desired Highpass crossover frequency.
Type 1 - Butterworth (BW), Bessel and Linkwitz-Riley(L-R)
Selects the desired crossover filter type.
Low Slope 1 - 6-24dB/Octave (BW, Bessel) 12-48dB/Octave (L-R)
Sets the Lowpass slope of the crossover filter.
High Slope 1 - 6-24dB/Octave (BW, Bessel) 12-48dB/Octave (L-R)
Sets the Highpass slope of the crossover filter.
Low Fc 2 - 20Hz to 20kHz
Selects the desired Lowpass crossover frequency.
Center Fc 2 - 20Hz to 20kHz
Adjusts the Low Fc and High Fc together.
High Fc 2 - 20Hz to 20kHz