DDK HFC3000II - Introduction; For the safety of operator and equipment; Points to check when unpacking

I
I
n
n
t
t
r
r
o
o
d
d
u
u
c
c
t
t
i
i
o
o
n
n
Thank you for purchasing our Handheld Nutrunner.
This instruction manual describes the procedures for installation, and handling, and actions to
be taken in case of any failure.
◆ This instruction manual shall be delivered to the end user who operates the equipment.
◆ Read all instructions before use, and always keep this instruction manual with the equipment.
◆ Items not described in this instruction manual shall be considered “unavailable.”
◆ The product specification and appearance described in this instruction manual are subject to change without notice.
◆ All rights reserved. Any disclosure, copying, distribution, or use of the information contained herein is strictly
prohibited.
◆ It is important for you to read all “Safety Precautions” before using the equipment, and understand and observe
all instructions and recommendations included in this manual.
◆ Read all instructions and recommendations included in this manual, understand the functions and performance
of this nutrunner, and use this machine correctly.
◆ Wirings and parameter settings shall be conducted by a professional engineer.
◆ Indicate the following on all instruction manuals that use this equipment.
・This equipment is capable of high voltages hazardous to human life.
◆ Never conduct a withstand voltage test or megger test on this equipment.
For the safety of operator and equipment
Please confirm the following when unpacking this equipment.
◆ Confirm that you received the correct model that you had ordered.
◆ Confirm that there are no missing parts, accessories or tools. (Refer to the system structure
specification list.)
◆ Check for any damage caused during transportation.
Points to check when unpacking
S0140185-H