Chapter 6 Description of Operations
PAGE 6-15
6-4-5. Indications in the RUN Mode(System Setting Mode)
In the system setting mode, “SYS.” is indicated in the WORK indication part.
The D-No. indication part is changed by pressing the [▲] or [▼] switch and the content
corresponding to No. is indicated accordingly. The value in the D-No. indication part can be
skipped by 10 at a time by long-pressing the [▲] or [▼] switch.
Please refer to the “List of Parameters” regarding the details of the set values.
“WORK” “COUNT/D-No.” “DATA”
Torque Unit
Software Version
Amplifier Version
Touch panel
number of retries
[▲] switch or [▼] switch
(skipping by 10 at a time by
long-pressing)
S0140185-H
To Next Page
Loading...