Install the controller using the specified screws.
Failure to observe this instruction may cause malfunction.
Use the specified combination of the tool and the controller.
Failure to observe this instruction may cause fire and malfunction.
The power input parts must be provided with safety measures such as breakers and
circuit protectors.
Failure to observe this instruction may cause fire and malfunction.
Do not use a tool or a controller that has damages or missing parts.
Failure to observe this instruction may cause fire, injury, and malfunction.
Do not get on the top of equipment or place a heavy object on the top of equipment.
Failure to observe this instruction may cause injury, and malfunction.
Do not subject the equipment to excessive shock or impact.
Failure to observe this instruction may cause malfunction.
Provide proper and firm wiring.
Failure to observe this instruction may cause injury, fault, and malfunction.
Operate the equipment with the specified power supply voltage.
Failure to observe this instruction may cause injury, electric shock, fire, and malfunction.
When operating the equipment at a location such as the following, take sufficient measures to
shield the equipment.
◆Location where noise is generated
◆Location where the equipment is subjected to a strong electric field or magnetic field
◆Location a power wire is not laid nearby.
Failure to observe this instruction may cause injury, fault, and malfunction.
To Next Page
Loading...