omreport rac: Viewing Remote Access Controller Components 117
omreport rac viewcertificate
Use the omreport rac viewcertificate command to view the server or certificate authority (CA) certificate
on the RAC. The only parameter you must specify is whether the certificate you want to view is a
CA certificate or a server certificate. Table 6-6 displays the valid parameters for the command.
In the sample output that follows, the subject is the company or organization that is requesting the
certificate signature. The issuer is the organization that is granting the certificate.
The following example is sample output from the command omreport rac viewcertificate type=ca:
Type CA Certificate
Serial l00
Keysize 1024
Valid From DSU+15:34:31
Valid To DSU+15:34:31
Subject CN=test, O=test, OU=test, L=Austin, ST=Texas, C=US,
E=name@company.com
Issuer CN=Thawte Test CA Root, O=Thawte Certification,
OU=TEST TEST TEST, L=San Jose, ST=CA, C=US,
E=name@thawte.com
Table 6-6. omreport rac viewcertificate
name=value pair Description
type=server | ca Indicates whether the certificate you are viewing is a server certificate or a CA certificate.
To Next Page
Loading...
Need help?
General
