Dell Command Line Interface User Manual

omconfig rac: Managing the Remote Access Controller 129
omconfig rac remote
Use the omconfig rac remote command to specify the remote features property values. Table 7-9 shows
the valid parameters for the command.
Example Command
The following example sets one name=value pair.
Ty p e :
omconfig rac remote floppytftpenable=true
The following message appears:
Command Successful. Please reset RAC card!
omconfig rac rmdialinuser
Use the omconfig rac rmdialinuser command to remove a dial-in user. Table 7-10 shows the valid
parameters for the command.
Table 7-9. omconfig rac remote
name=value pair Description
floppytftpenable=true | false true: Enables remote boot.
false: Disables remote boot.
floppytftpipaddr=<text> Sets the floppy TFTP address.
floppytftppath=<text> Sets the floppy TFTP path.
fwupdatetftpipaddr=<text> Sets the firmware TFTP address.
fwupdatetftppath=<text> Sets the directory path on the TFTP server where the
firmware update images reside.
Table 7-10. omconfig rac rmdialinuser
name=value pair Description
username=<text> Specifies the user name of entry which is to be deleted. If no
user name is specified, an index must be specified.
index=<n> Specifies the index of the entry which is to be deleted. If no
index is specified, a user name must be specified.

Dell Command Line Interface Specifications

General

Brand	Dell
Model	Command Line Interface
Category	Network Card
Language	English