Dell Command Line Interface User Manual

156 Using the Storage Management Service
Complete Syntax
omconfig storage controller action=exportlog controller=id
where id is the controller ID as reported by the omreport storage controller command.
Example Syntax
For example, to export the log on controller 1, enter:
omconfig storage controller action=exportlog controller=1
By default, the log file is exported to C:\WinNt or C:\Windows for Microsoft
®
Windows
®
systems (based
on the Windows version used) and /var/log on all Linux systems.
Depending on the controller, the log file name will be either afa_<mmdd>.log or lsi_<mmdd>.log
where <mmdd> is the month and date. For more information on the controller log file, see the online help.
NOTE: The export log file command is not supported on the PERC 2/SC, 2/DC, 4/IM, CERC ATA 100/4ch, and
CERC SATA 1.5/2s controllers.
omconfig Import Foreign Configuration
Use the following omconfig command syntax to import all virtual disks that reside on physical disks
newly attached to the controller.
Complete Syntax
omconfig storage controller action=importforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in firmware version 5.0.x.
Example Syntax
For example, to import foreign configurations on controller 1, enter:
omconfig storage controller action=importforeignconfig controller=1
omconfig Import/Recover Foreign Configuration
Use the following omconfig command syntax to import and recover all virtual disks that reside on
physical disks newly attached to the controller.
Complete Syntax
omconfig storage controller action=importrecoverforeignconfig
controller=id
where id is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in firmware version 5.1.1.

Dell Command Line Interface Specifications

General

Brand	Dell
Model	Command Line Interface
Category	Network Card
Language	English