Dell Command Line Interface - Omreport Power Supply Status; Omreport EMM Status

142 Using the Storage Management Service
omreport Power Supply Status
omreport EMM Status
Table 8-11. omreport Power Supply Commands
Required Command Levels (1, 2, 3)
and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the system.
controller=id enclosure=
<ENCLOSUREID> info=
pwrsupplies
where id is the controller number
and the enclosure number.
For example: controller=0
enclosure=2
Displays the power supplies for the
specified enclosure.
controller=id enclosure=
<ENCLOSUREID> info=
pwrsupplies index=n
where id is the controller number
and the enclosure number and “n”
is the number of a power supply.
For example: controller=0
enclosure=2 info=pwrsupplies
index=1
Displays the specified power
supply.
Table 8-12. omreport EMM Commands
Required Command Levels (1, 2, 3)
and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the
system.
controller=id enclosure=
<ENCLOSUREID>
info=emms
where id is the controller number
and the enclosure number.
For example: controller=0
enclosure=2
Displays the enclosure
management modules (EMMs)
for the specified enclosure.