42 omreport: Viewing System Status Using the Instrumentation Service
---------------
Power Supplies
----------------
Settings
Enable: Informational, Warning and Critical
Disable: None
-----------
Fans
-----------
Settings
Enable: Critical
Disable: Informational and Warning
The full report lists the settings for all components in your system for which events can be generated.
To view the status for components of a specific type, use the omreport system events type=<component
name> command. This command displays a summary of each component in your system for which
events can be generated. Table 3-6 shows the events displayed for various component types.
NOTE: Some component types may be unavailable on your system.
Table 3-6. System Events by Component Type
name=value pair Description
type=accords Reports events for AC power cords.
type=battery Reports events for batteries
type=currents Reports events for fan amperage probes.
type=fanenclosures
Reports events for fan enclosures.
type=fans Reports events for fans.
type=intrusion Reports events for chassis intrusion.
type=log Reports events for logs.
type=memory Reports events for memory.
type=powersupplies Reports events for power supplies.
type=redundancy Reports events for redundancy.
type=temps Reports events for temperatures.
type=volts Reports events for voltages.
To Next Page
Loading...
Need help?
General
