Dell Command Line Interface User Manual

omconfig: Managing Components Using the Instrumentation Service 83
config=user
(continued)
id=number lanaccesslevel=
administrator | operator | user| none
id=number: ID number of the user being
configured.
lanaccesslevel=administrator: User with an
ID has access privileges of an Administrator
for the LAN channel.
lanaccesslevel=operator: User with an ID has
access privileges of an Operator for the
LAN channel.
lanaccesslevel=user: User with an ID has
access privileges of a User for the
LAN channel.
lanaccesslevel=none: User with an ID does
not have access privileges for the
LAN channel.
id=user id
dracusergroup=admin | poweruser |
guest | testalert | custom | none
id=user id: User ID of the user
being configured.
dracusergroup=admin: Enables the
Administrator User privileges.
dracusergroup=poweruser: Enables the
Power User privileges.
dracusergroup=guest: Enables the Guest
User privileges.
dracusergroup=testalert: Enables the Test
Alert user privileges.
dracusergroup=custom: Enables the Custom
User privileges.
NOTE: See Table 4-13 for more information on
the name=value pair. dracusergroup=custom.
dracusergroup=none: Does not enable
user privileges.
Table 4-12. omconfig chassis remoteaccess (continued)
name=value pair 1
config=
name=value pair 2 Description

Dell Command Line Interface Specifications

General

Brand	Dell
Model	Command Line Interface
Category	Network Card
Language	English