Dell DM5500 - Page 67

Table 26. DM5500 Configuration UI error messages(continued)
Error code Error message Troubleshooting steps
CONN0120 IP address <IP_x> not in same subnet range
of gateway IP address <IP_y>.
● Use the IP address that is in the same subnet range of the
gateway.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0121 IP addresses <IP_x> and <IP_y> are not
in same subnet range of gateway IP address
<gateway_IP>.
● Use the IP addresses that are in the same subnet range of
the gateway.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0122 IP addresses <IP_x> and <IP_y> are not in
same subnet range.
● Use the IP addresses that are in the same subnet range.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0123 IP address <IP> is not in same subnet range
of gateway IP address <gateway_IP>.
● Use the IP addresses that are in the same subnet range of
the gateway.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0124 Subnet <IP_x> conflicts with appliance
private subnet <IP_y>.
● Provide a different subnet, or change the appliance private
subnet.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0125 IP address <IP_x> is part of restricted
appliance private subnet <IP_y>.
● Provide a different IP or subnet, or change the appliance
private subnet.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0131 DNS validation failed for server
<DNS_server_IP>. Reverse lookup entry
a
not found for IP <Management_IP>.
● Ensure that the correct lookup entries are present in the
DNS server.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0132 DNS validation failed for server
<DNS_server_IP>. IP <Management_IP>
has multiple reverse lookup entries
a
-
<multiple_reverse_lookup_entries_
of_IP>.
● Ensure that only one Fully Qualified Domain Name (FQDN)
entry is present for the IP address.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0133 DNS validation failed for server
<DNS_server_IP>. IP <Management_IP>
has reverse lookup entry
a
as
<reverse_lookup_of_IP>, but forward
lookup entry
a
not found for
<reverse_lookup_of_IP>.
● Ensure that the correct lookup entries are present in the
DNS server.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0134 DNS validation failed for server
<DNS_server_IP>. IP <Management_IP>
has reverse lookup entry
a
as <reverse_lookup_of_IP>, but
<
reverse_lookup_of_IP> has multiple
forward lookup entries
a
- <multiple_IPs>
● Ensure that the correct lookup entries are present in the
DNS server.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
CONN0135 DNS validation failed for
server <DNS_server_IP>. IP
<Management_IP> has reverse lookup
entry
a
as <reverse_lookup_of_IP>,
but <
reverse_lookup_of_IP> has
forward lookup entry
a
as
<IP_other_than_Management_IP>.
● Ensure that the correct lookup entries are present in the
DNS server.
● Click Back and re-submit the configuration.
● If the issue persists, contact Customer Support.
Troubleshooting 67