Dell E60S - Installing the Internal Cooling Fan

Figure 54. Removing the internal cooling fan
CAUTION: Do not remove or install the fan by holding the fan blades.
Next steps
1. Replace the internal fan.
Installing the internal cooling fan
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the air shroud
Steps
1. Align the four tabs on the fan with the four slots on the system wall.
2. Press and slide the fan into the slots until the release tab locks into place.
3. Connect the fan power cable connector to the connector on the system board.
Installing and removing system components
57