FTOS Service Agent | 523
test-limit
c e
Set the number of times that the test list should be executed.
Syntax
test -limit number
Parameters
Default
none. If the test-limit number is removed or not configured, there is no limit for how many times to
test for the condition.
Command Mode
conf-callhome-policy
Command
History
Related
Commands
number
Set the number of times the test list matches that should be attempted.
Range: 0–256
Version 7.8.1.0 Introduced on C-Series and E-Series
dampen Set a delay before sampling for a test condition again after it has been matched.
test-condition
(comparing samples)
Configure an action to collect and compare multiple samples of a statistic.
policy Create a policy with a name and enter config-callhome-policy-name mode.
policy-test-list Name a policy test list and enter the config-callhome-actionlist-name mode.
sample-rate Set the sampling interval for how often to execute the configured test condition.
To Next Page
Loading...
