Touchpad buttons
Removing the touchpad buttons
Prerequisites
● Follow the procedure in before working inside your computer.
● Remove the battery.
● Remove the primary M.2 2280 solid state drive or primary M.2 2230 solid state drive.
● Remove the keyboard.
● Remove the base cover.
● Remove the fan.
● Remove the heat-sink (UMA) or heat-sink (discrete).
● Remove the Wi-Fi I/O board.
● Remove the WLAN card.
● Remove the WWAN card.
● Remove the dock I/O board.
● Remove the rear I/O board.
● Remove the system board.
● Remove the display assembly.
● Remove the power button board.
● Remove the power button board with finger print reader.
● Remove the touchpad.
About this task
The following images indicate the location of the touchpad buttons and provide a visual representation of the removal
procedure.
Steps
1. Remove the two (M2x3.5) screws that secure the touchpad buttons to the system chassis.
2. Lift the touchpad buttons from the system chassis.
112
Removing and installing components
To Next Page
Loading...
