Table 4. Connectors on the wireless card
Antenna Cable Color
Main (white triangle) White (cable number 13)
Auxiliary (black triangle) Black (cable number 3)
4. Slide and remove the WLAN card from the WLAN card slot.
Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Steps
1. Slide the WLAN card at an angle into the WLAN card slot.
2. Connect the antenna cables to the WLAN card. The following table provides the antenna-cable color scheme for the WLAN
card that supports your laptop.
46
Removing and installing components
To Next Page
Loading...
