Steps
1. Remove the four (M2.5x5) screws that secure the power button board bracket to the system chassis.
2. Lift the power button board bracket from the system chassis.
3. Remove the three (M2x3.5) screws that secure the power button board the system chassis.
4. Lift the power button board from the system chassis.
Installing the power button board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power button board and provides a visual representation of the installation
procedure.
84
Removing and installing components
To Next Page
Loading...
