432 Configuring Switching Information
Figure 7-103. LLDP-MED Remote Device Information
The LLDP-MED Remote Device Information page contains the following fields:
•
Local Interface
— Specifies the list of all the ports on which LLDP-MED is enabled.
•
Capability Information
— Specifies the supported and enabled capabilities that was received in MED
TLV on this port.
–
Supported Capabilities
— Specifies supported capabilities that was received in MED TLV on this
port.
–
Enabled Capabilities
— Specifies enabled capabilities that was received in MED TLV on this
port.
–
Device Class
— Specifies device class as advertised by the device remotely connected to the port.
•
Network Policy Information
—If a network policy TLV is received in the LLDP frames on this port,
the following information displays:
–
Network Application
— Specifies the type of media application that the local device advertises in
the policy. A port may receive one or more application types, which include the following types:
• unknown
•voicesignaling
•guestvoice
• guestvoicesignalling
To Next Page
Loading...
