484 Viewing Statistics and Remote Monitoring
Figure 8-10. RMON History Control Table
Removing a History Control Table Entry
1.
Open the
RMON History Control
page.
2.
Select the
Remove
check box in the row of the history entry to remove.
3.
Click
Apply Changes
.
The table entry is removed, and the device is updated.
Viewing RMON History Control Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• RMON Commands
The following table summarizes the equivalent CLI commands for this feature.
To Next Page
Loading...
