Operating MATRIX control panel OP71 MATRIX Control Panel OP71
68 PR-2009-0021-GB • Subject to modifications • R5-04/2016
8.6.17 Air handling unit submenu
NOTICE!
Activating or deactivating of "minimum fan speed" applies to all controllers in the
cluster.
NOTICE!
If the function "enabling setpoints
➜ air handling unit" is deactivated (can be set only
using the service tool MATRIX.PC), the air handling unit menu item in submenu
"other menus" is not shown.
NOTICE!
The "Air handling unit" submenu only appears when using the central or low-profile
air handling unit control MATRIX 4700.
A "No feedback" message can be displayed if you have performed a configuration in
the submenu for "air handling unit", returned to the main menu, and immediately
accessed one of the "air handling unit" submenus. The message will remain as long
as the previously changed configuration for low-profile air handling unit control is not
transmitted and saved.
DAMAGE TO THE UNIT!
It is mandatory to make the above-listed configurations (insofar as the individual unit
functions are available). Otherwise a correct functioning of the control or the central
air handling unit cannot be ensured.
To Next Page
Loading...