MATRIX Control Panel OP71 About this Operation Manual
PR-2009-0021-GB • Subject to modifications • R5-04/2016 7
2 About this Operation Manual
2.1 Availability of the operation manual
In the current operation manual you will find important instructions on the safe and cor-
rect handling of the MATRIX control panel OP71.
This operation manual applies to operators, building technicians, technical personnel
or instructed persons as well as electricians.
This operation manual must be constantly available at the location of the MATRIX
control panel OP71. When working on the MATRIX OP71 equipment, observe all
instructions and precautions in the current operation manual.
2.2 Scope of the operation manual
This operation manual provides information about the following:
– Assembly/disassembly
– Installation
– Commissioning and testing
–Operation
– Maintenance and Troubleshooting
2.3 Symbols used
The following symbols are used to highlight particular text sections in this operation
manual:
– This symbol is used to indicate normal lists.
• This symbol indicates instructions to follow.
The result of an action is indicated with this symbol.
DencoHappel Matrix
®
is a registered trademark of DencoHappel.
Notice!
Here you will find additional information about using the MATRIX control panel
OP71.
To Next Page
Loading...