Develop ineo+ 353 - SMTP over Ssl;Start TLS; SMTP Authentication; POP before SMTP; POP over SSL

ineo+ 353/253/203 1-89
Setup items by operation
1
1.31.4 SMTP over SSL/Start TLS
Specify the settings for SMTP over SSL/Start TLS.
For details, refer to "SMTP over SSL/Start TLS" on page 1-26.
1.31.5 SMTP Authentication
Specify the settings for SMTP authentication.
For details, refer to "SMTP Authentication" on page 1-27.
1.31.6 POP before SMTP
Specify the settings for POP before SMTP.
For details, refer to "POP before SMTP" on page 1-27.
1.31.7 POP over SSL
Specify the settings for POP over SSL.
For details, refer to "POP over SSL" on page 1-29.
1.31.8 APOP Authentication
Specify the settings for APOP authentication.
For details, refer to "APOP Authentication" on page 1-30.
Waste Toner Box Full Provides notification when the waste toner box must be re-
placed.
Imaging Unit Yield Provides notification when the imaging unit must be re-
placed.
Fusing Unit Yield Provides notification when the fusing unit must be replaced.
Transfer Belt Unit Yield Provides notification when the transfer belt must be re-
placed.
Item Definition Prior confirmation