ineo+ 353/253/203 1-131
Setup items by operation
1
1.44 Other items on the Maintenance tab
This section describes other items specifiable on the Maintenance tab for the Web Connection.
1.44.1 Using external memory
Specify settings for using external memory on this machine.
To use an external memory, this machine must be equipped with an optional local interface kit.
Connecting external memory to this machine allows sending scanned data to external memory and printing
data in external memory.
2
Reminder
The optional local interface kit is equipped with two USB connectors. As one is for optional connection,
two sets of external memories cannot be connected at a time.
Do not pull out the external memory while a document is being saved to the external memory or being
printed.
External Memory Function Settings
In Administrator mode of Web Connection, select the Maintenance tab - "External Memory Function
Settings".
Specify the following settings.
Item Definition
Save Document To send scanned data to external memory, select "ON".
To prevent data from being stolen, "OFF" is specified as default. To use an external mem-
ory, select "ON".
Print Document To print data in external memory, select "ON".
To Next Page
Loading...
