Develop ineo+ 353 - IPP Authentication Setting

ineo+ 353/253/203 1-66
Setup items by operation
1
1.21.3 IPP Authentication Setting
In Administrator mode of Web Connection, select the Network tab - "IPP Setting".
Specify the following settings.
Item Definition Prior confirmation
IPP Authentication Set-
ting
To perform IPP printing, select the "IPP Authentication Set-
ting" check box.
Authentication Method Specify the authentication method.
User Name Specify the user name (up to 20 characters).
Password Enter the password (up to 20 characters).
realm Specify realm (up to 127 characters).
If the authentication method is digest, realm must be speci-
fied.
Authentication method