Develop ineo+ 353 - Header Information

ineo+ 353/253/203 1-49
Setup items by operation
1
1.15.4 Header Information
In Administrator mode of Web Connection, select the Store Address tab - "Header Information".
Specify the following settings.
Registration
Item Definition Prior confirmation
Sender Fax No. Register the sender fax number. Normally enter the fax
number of this machine.
Default If no sender name is specified when sending a fax, the send-
er name with a check mark is used.
Sender Name Displays registered sender names.
[Edit] Registers or edits the sender name.
[Delete] Deletes the registered sender name.
Item Definition Prior confirmation
No. Displays the registration number.
Sender Name Enter the sender name (up to 30 characters).