ineo+ 353/253/203 1-106
Setup items by operation
1
1.36 Limiting users using this machine (Windows domain/workgroup)
Specify settings for limiting users of this machine using NTLM authentication.
To perform authentication using NTLM when using Windows NT4.0 or using Active Directory of Windows
2000 Server or Windows Server 2003, use this setting. This setting limits functions available on a user basis.
This machine supports the direct hosting service. To execute NTLM authentication in the IPv6 environment,
the Direct Hosting setting must be enabled. When the Direct Hosting setting is enabled, this machine
acquires the IPv6 address of the Windows server using the DNS server.
Specify the settings according to the following flowchart.
1.36.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
To execute NTLM authentication in the IPv6 environment, the Direct Hosting setting must be enabled.
Prepare a DNS server and be sure to specify the DNS settings of this machine correctly.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2.
TCP/IP Settings
External Server Registration
User Auth/Account Track
Default Function Permission
Client Setting
IPv6 environment?
No Yes
Use the WINS server?
Direct Hosting Setting
Yes No
WINS Setting
Finish
To Next Page
Loading...
