11
DAILY CHECKS
Check metal detection system. Always check metal detector system after tractor
engine has been shut off.
Remove all crop residue and wipe off oil and dirt.
Lubricate and service the machine according to the Servicing section.
Check tension of belts and chains. Check all sheaves and sprockets for correct
alignment.
Check tire pressure. See Specications.
Make sure harvester is hooked to tractor correctly, and that the safety chain is
safely installed. Make sure all controls are operable.
Sharpen knives and adjust shearbar once or twice a day.
CHECK LIST
Manual No. F4117E987E V1.1
To Next Page
Loading...