21
SAFETY SIGN APPLICATION PROCEDURE
1. The surface should be free from dirt, grease, earth,
or any other foreign material.
2. When the surface is dry, remove a portion of the
backing paper and apply the decal in part and align
its position as per the surrounding parts. Slowly peel
off the remaining backing paper and apply hand
pressure.
3. Press slightly on the surface of the safety sign to
remove all air bubbles.
SAFETY SIGN LOCATION
IMPORTANT: Decals must be kept clean to allow easy reading at all times.
16
16
25
39
41
42
10
5
Manual No. F4117E987E V1.1
To Next Page
Loading...