39
ASSEMBLING INSTRUCTIONS - LIQUID INCORPORATION SYSTEM
STEP 1
Install each of the two support brackets (items 1 and 1a) with two arms (item 2), four 1/2” x 6 1/2” lg carriage bolts
and four 1/2” lock nuts. Position the rear support bracket (item 1a) against the exterior shaft reinforcement plate
(item 5).
1
1a
5
2
4
3
5
1a
Figure 27 Installing the tank support brackets
Pressed against the
reinforcement plate
Manual No. F4117E987E V1.1
To Next Page
Loading...