150
ADJUSTMENTS - MAINTENANCE
1. Hand tighten the two bolts on each side (item 1).
3
1
2
Figure 231
2. Insert a 1/32‘’spacer (item 3) at each end of the roll,
between the roll and the half bottom (item 2).
3. Using a vise grip (item 5), clamp the half bottom
and roll together. Tighten the two bolts on each side
properly (item 1).
3
2
5
Figure 232
4. Using the three 5/16‘’ X 4 1/2‘’ lg carriage bolts (item
4), adjust to 1/32‘’ the gap between the roll and the
half bottom, over the entire width.
4
2
1/32”
Figure 233
Manual No. F4117E987E V1.1
To Next Page
Loading...