DMP Electronics XTLtouch Programming Guide

38 XTLtouch Series Programming Guide | Digital Monitoring Products
RECEIVER ROUTING
This option displays if Zone Type is set for Auxiliary 1 or Auxiliary 2.
Press any top row key to select the Receiver Routing for the selected zone.
Select NORM to send Alarm and Supv/Trbl messages from this zone to receiver 1 or
receiver 2 as programmed within the receiver.
Select 1 to send Alarm and Supv/Trbl messages from this zone to receiver 1 only,
regardless of the programming for that receiver.
Select 2 to send Alarm and Supv/Trbl messages from this zone to receiver 2 only,
regardless of the programming for that receiver.
Select BOTH to send Alarm and Supv/Trbl messages from this zone to both receivers,
regardless of the programming for either receiver.
ZONE NUMBER
Enter the zone number you want to program next. If all zones are programmed, press
the ARROW key at the ZONE NO: – display to continue.
RECEIVER ROUTING
NORMAL
NORM 1 2 BOTH
ZONE NO: -
00

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English