DMP Electronics XTLtouch Programming Guide

39 XTLtouch Series Programming Guide | Digital Monitoring Products
STOP
At the STOP option, pressing any select area allows you to exit the programmer function of the XTLtouch panel.
When selected, the panel performs an internal reset and exits the programmer. The Stop function causes the following
conditions to occur:
• All 1100 Series DMP Wireless transmitters are reset to NORMAL
• The panel’s Status List is CLEARED
During the Stop function, all keypad displays are momentarily disabled for two seconds. Afterwards, the programming
function is terminated and the keypads return to the Status List display.

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English