Dnepr MT9 - Checking Motorcycle Technical Condition

Before doing this, it is necessary to adjust:
spark plug gaps;
contact breaker gaps;
clearances in the va lve gear drive;
carburettors fo r idling, average speed and for the synchronous
operation of the cylind ers;
brakes contro ls;
c
lut ch release drive;
tyre pressure.
Fig. 2. Motorcycle "Dn epr" MTIO
At the same time, check the amo unt of oil in the crankcase and
in the gear box and main drive cas in gs .
Adju
st the clea ranc es in accor danc e with lhe Ope ratin g In s tru c-
tions.
II. CHECKING THE MOTORCYCLE FOR TECHNICAL
CONDITION
The technical co ndition of the motorcycle, of its units and assem-
blies
deteriorates in the process of co ntinuou s service. As th e compo-
nents become worn, the eng ine power diminishes, fuel an d oil con-
s
umption incr eases , operation of some of the units becomes noisy and
failures occur mor e fre qu ently due to fatigue and corrosion. The
wear of com ponent s leads to increas ed clearances in the joi nts, and
ca uses the dynamic, economical and operating ch arac teri stic s of the
motorcycle to deteriorate.
Therefore, periodic checks of the motorc ycle for tec hnical condi-
tion a
nd elimination of detected faults in due tim e are mo st impor-
tant to prolong its service life. In order to determine whether the