DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 88 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
3.4. Next using a drill with the 7/32” bit align the drill bit with the center punch indentation to drill out the
mounting holes for the exhaust manifold.
3.5. Deburr the (4) holes.
Images 8 and 9: CL96 side panel view with (4) mounting holes the side panel.
3.6. Remove the template and drop cloth.
NOTE: Ensure metal fillings are completed removed from the enclosure interior to prevent shorts or
any other damage.
3.7. The side panel is now ready to mount the Exhaust Manifold.
4. Installation of Exhaust Manifold.
4.1. Utilizing the (4) 10-32 3/8” long screws mount the manifold to the side of the enclosure. Utilize
typical torque for a 10-23 stainless steel screw.
4.2. Mount the manifold with the outlet port facing upwards or downwards according to your location
requirements.
Images 10, 11, and 12: CL96 side panel view with (4) mounting holes the side panel.
To Next Page
Loading...