- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
1.4 Avoiding foreseeable misuses
- Do not use flammable fluid coating materials and detergents.
- Do not point the atomizer towards people.
- Do not spray into the eyes.
- Do not reach into spray jet.
- Do not inhale atomized coating materials.
- Never operate the atomizer outside the spray booth.
- Never override or deactivate any safety devices.
The atomizer can be dangerous if it is not operated according to this
operation manual.
Pos: 5 /INP/Be ll2/01_03 M aterial_A A @ 60\mod_15802 00660361_2 0.docx @ 666 479 @ 2233534 44 @ 1
1.5 Material numbers
The document is valid for the product:
Rotating Atomizer with External Charging EcoBell2 SL EC
N34150001
without recirculation
N34150003
without recirculation
N34150005
with recirculation
1.6 Device combination
1.6.1 Dürr components needed for the use of the atomizer as 2G device
- Generator
- Controller
- Wiring board
- R/O converter
- Flange package
- Bell disk
- High voltage line with plug
1.6.2 Dürr components needed for the use of the atomizer as 3G device
- Flange package
- Bell disk
- High voltage line with plug
To Next Page
Loading...