- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
• Visually check the shaping air ring:
• Shaping air holes must be clean.
• In case of heavy contamination that cannot be removed by
rubbing, the atomizer body must be removed
These tasks are described in the chapters “Removing and
installing the atomizer body" and “Cleaning the shaping air
ring."
7.4.3.3 Electrode fingers
Fig. 38: Cleaning the electrode fingers
• Wipe electrode fingers body with a damp cloth back to front.
Fig. 39: Cleaning the electrode ring
• Wipe the ring of the electrode ring all the way around with a damp
cloth.
Fig. 40: Cleaning the electrode tips
• Clean the electrode tips with a soft brush.
To Next Page
Loading...