- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
Monitoring and checking of the Electrode ring:
Interval Structural
component
Monitoring/Checks
Daily prior to
startup
Electrode ring Pollution and damage to the
electrode ring
Electrode finger Pollution and damage to the
electrode finger
Electrodes All electrodes must be pointed
and straight.
Pos: 43 /INP/ Bell2/07_00 R einigung und Wartung @ 3 9\mod_14085 30457040_2 0.docx @ 494 225 @ 1 @ 1
7 Cleaning and maintenance
Pos: 44 /INP/ Bell2/07_ 01 Sicherhei tshinweise_A A @ 57\mod_1 5088392394 44_20.docx @ 622325 @ 23 3 @ 1
7.1 Safety Instructions
The following safety instructions must be followed while carrying out
cleaning and maintenance works.
C A U T I O N
Danger due to High Voltage
Danger of electric shocks and discharges.
Shut off the high voltage supply before commencing any cleaning and
maintenance work and secure it against being switched on again.
C A U T I O N
Danger due to High Voltage
Risk of electric shock and discharges.
Touch and discharge the atomizer with a grounding rod before
touching it.
If possible, keep the grounding rod attached while working on the
atomizer inside the cabin.
To Next Page
Loading...