- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
7.4.3.5 Drying the atomizer
Fig. 43: Drying the entire atomizer
• Dry the entire atomizer with a clean, dry cloth.
7.4.3.6 Final work
• All components have to be correctly fitted as shown in the drawing
and parts list.
• Check the flawless condition of assembly
(damage, dirt, and function).
• Check for free movement of the bell disk.
The bell disk with the shaft of the turbine must rotate by hand
without resistance.
After cleaning, always check the distance between the shaping air ring
and the bell disk. The distance may have changed.
A T T E N T I O N
Risk of property damage and production disruption
In case of wrong assembly, shaping air ring and bell disk can rub
against each other. Shaping air ring and bell disk can be damaged.
Check the distance between shaping air ring and bell disk. The bell
disk should not rub against the shaping air ring.
Pos: 48 /INP/ Bell2/07_05 W artungsar beiten_AA @ 57\ mod_150 6431296387 _20.docx @ 62 1701 @ 2 @ 1
To Next Page
Loading...